Ethylene Oxide Sterilizer
HTAJ2 series large-scale ethylene oxide sterilizer is a kind of low-temperature sterilization equipment: This product is designed by using advanced computer technology, automation technology, welding technology and process on the basis of absorbing the advantages of similar products domestic and overseas.
|
Model
|
HTY-2cube
|
HTY-3cube | HTY-6cube |
|---|---|---|---|
| Disinfection mode | Low temperature | Low temperature | Low temperature |
| Rated power | 6KW | 14KW | 14KW |
|
Liner specifications length * width * height (mm)
|
2400*900*1100 | 2000×1000×1500 | 3350*1200*1500 |
| Liner specifications length * width * height (mm) | 2600*1400*1400 | 2300×1250×1900 | 3500×1900×1800 |
| Working pressure | -60Kpa | -60Kpa | -60Kpa |
| Adjustable range of working temperature | 50℃ ±3℃ | 50℃ ±3℃ | 50℃ ±3℃ |
| Working humidity | 45%‐75% | 45%‐75% | 45%‐75% |
| Sterilization time | 0-99 hours adjustable | 0-99 hours adjustable | 0-99 hours adjustable |
| Material of disinfection room | 304 anticorrosive stainless steel | 304 anticorrosive stainless steel | 304 anticorrosive stainless steel |
Technical characteristics:
HTY series ethylene oxide sterilizer is a special equipment for low-temperature fumigation and sterilization of articles sealed in the sterilization room under a certain temperature, pressure, humidity and a certain action time with the mixture of pure ethylene oxide and ethylene oxide. Ethylene oxide gas is a very active chemical disinfectant, which can not only achieve broad-spectrum sterilization, but also achieve a reliable sterilization effect.
Advantages:
- Simple operation: one-button operation, microcomputer control, simple and convenient, digital display of sterilization process.
- Print records: Record and print sterilization information for sterilization process, which is convenient for verification and archiving.
- Filtration system: The air inlet is equipped with a filtration system, which can effectively filter out germs and microorganisms and avoid secondary pollution during exhaustion.
- The ethylene oxide sterilizer must be placed in a well-ventilated place, and it must not be placed near a fire source.
- In order to facilitate repair and regular maintenance, 51cm space should be reserved on each side (including the top) of the ethylene oxide sterilizer.
- Special exhaust pipes should be installed and completely isolated from other exhaust pipes of the building.
- Keep ethylene oxide sterilizers and cylinders or cans away from sources of ignition and static electricity.
- Ethylene oxide storage should be free of ignition sources, no rotating motor, no sun, good ventilation, and the temperature is lower than 40 ℃, but it should not be placed in the refrigerator. Dispose of in strict accordance with the relevant national storage requirements for flammable and explosive materials.
- Do not use too much force when administering or opening the bottle, so as not to spray the liquid.
- Monitor the air concentration of the ethylene oxide working environment every year.
- Ethylene oxide staff should be trained in expertise and emergency management.
